How to choose a pipeline booster pump?

Release time:

2024-03-26

How to choose a pipeline booster pump?
Pipeline booster pump is a special term for pressure boosting installed on pipelines. It is not limited to a specific type or form of pump. Generally, the pipeline booster pump referred to in the industry generally refers to a pump with a pipeline structure, which can be directly installed in series like a pipeline. Since pipeline booster pump belongs to the alias of pump, its selection also follows the selection of pump, except for the parameters that must be paid attention to, such as flow rate, head, material, medium density, etc.
The flow rate and head of a water pump usually refer to its rated flow rate and rated head. The rated flow rate and rated head refer to the pumping capacity and the height at which the water can be pumped when the inlet and outlet of the water pump are fully open and working at the power frequency (50Hz). The rated head corresponding to the rated flow rate of the water pump is called the optimal operating point of the water pump. This working point is a high efficiency working point for the water pump. Therefore, when selecting a pump, try to choose a pump with good working point parameters. This can not only unleash the good potential of the pump, but also improve its service life.